Shop

PC 2.1 CableNote: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the package.

H 99 Protective cover for RCT basic 3378500 and RET basic / controlNote: For all International Orders, the buyer will be solely responsible for the...

H 62.51 Stainless steel sensorSpare sensor for use with ETS-D5 and ETS-D6 Depth of immersion: 230 mm Diameter: 3 mm Length: 260 mm Material AISI...

H 66.51 Stainless steel sensor, glass-coatedFor use with ETS-D5 and ETS-D6, for work with aggressive media such as acid and alkaline solutions. Depth of immersion...

H 70 Extension cableTo separate the casing from the sensor. The casing with the electronics may thus be kept away from dangerous vapor released by...

R 1303 Dissolver stirrerRadial flow, for drawing the material to be mixed from the top and the bottom. High turbulence, high shearing forces. Particle reduction....

R 1333 Anchor stirrerTangential flow, high shearing rate at edges, minimum deposits on the vessel wall. Used at low speeds. Polymer reactions, even distribution of...

PC 2.2 AdapterAdapter, 9 pins (F), 25 pins (M)Note: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and...

IKA 2755900, PC 1.4 Adapter, 9 Pins (F), 15 Pins (M) Note: For all International Orders, the buyer will be solely responsible for the customs...

PC 1.5 CableLength 2,5 mNote: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the...

Vxr Basic Vibrax Orbital ShakerNote: For all International Orders, the buyer will be solely responsible for the customs clearance, duty, and taxes imposed on the...

H 29 Oil bath attachment, 1LThe oil bath attachment H 29 can be used as oil baths together with an IKAMAG magnetic stirrer with heating...

H 30 Oil bath attachment, 1.5LThe oil bath attachment H 30 can be used as oil baths together with an IKAMAG magnetic stirrer with heating...

IKA 2830200, S 25 KV - 25 F IL Dispersing Element, Ø25 mm Note: For all International Orders, the buyer will be solely responsible for...

Continuously operating universal grinder with a speed range of 3,000 - 6,500 rpm. Powerful drive Easy to clean working surface made of stainless steel Two...

H 240 Ring setTo cover the heating baths HB 4 basic and HBR 4 digital. Prevents dust penetration, uncontrolled heat dissipation as well as water...

MF 10.1 Cutting-grinding headFor crushing fibrous substances such as paper and vegetation, but also for plastics and material with a low volume weight. Before being...

MF 10.2 Impact grinding headFor crushing brittle, hard materials such as minerals, building materials up to Mohs hardness 6. Before being discharged, the ground material...

Includes A 11.1 spare beaterBatch mill for 2 different grinding procedures:Impact grinding of hard, brittle or non-elastic grinding materials with high-grade stainless steel beater. This...

A 11.4 Grinding chamberMade of polycarbonate with stainless steel inlet (AlSl 316L). Not suitable for cooling with N2, only applicable with double beater A 11.6....

A 11.1 Spare beaterFor pulverizing substances with a Mohs hardness up to 6. Included with the analytical mill A 11 basic. Material: stainl. steel (AISI...

A 11.2 Cutting bladeFor pulverizing soft, fibrous grinding materials. Not included with the analytical mill A 11 basic. Material: stainl. steel (AISI 440B)Note: For all...

MF 0.25Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 0.25 mm stainl. steel (AISI 304)*Note: For all...

MF 0.5Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 0.5 mm stainl. steel (AISI 304)Note: For all...

MF 1.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 1.0 mm stainl. steel (AISI 304)Note: For all...

MF 2.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 2.0 mm stainl. steel (AISI 304)Note: For all...

MF 3.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 3.0 mm stainl. steel (AISI 304)Note: For all...

MF 4.0Interchangeable sieve for insertion into the grinding heads ensures maximum particle size filtering. Hole size: Ø 4.0 mm stainl. steel (AISI 304)Note: For all...