BUCK Scientific Educational CCD GC with Warranty

• CCD Detector
• Hydrocarbon and hydrogen selective
• Detects down to 500ppm
• Gasless operating capability
• Inexpensive
• Built-in spare element
• On-Column Injector
• Built-in "whisper quiet" Air Compressor
• 1 channel PeakSimple Data System
• 1-meter Hayesep-D Column
  . . . on the ultra compact 310 chassis

Our 310 Gas-less Educational GC system is ideal for undergraduate chemistry classes where the principles of gas chromatography are demonstrated on the same equipement students will encounter in industry. The Gas-less Educational GC includes a built-in "whisper quiet" air compressor and a CCD detector. The CCD detects combustible (hydrocarbon) molecules, and it operates on air carrier gas from the air compressor. Our educational systems are for domestic customers only, and only come in a 110V configuration.

This GC is perfect for teaching situations where compressed gas cylinders cannot be used due to safety considerations or budgetary limitations. Because it operates on its own infinite supply of room air, the Gas-less GC may be used to peform demonstrations in the classroom, instead of the lab. Most conventional GCs require helium gas. Compared to the ongoing cost of cylinder rental, storage and gas consumption, operation of the Gas-less Educational GC is essentially free, except for the minimal cost of electricity. The Gas-less Educational GC system is equipped with a built-in, single channel PeakSimple data system, which provides powerful yet easy data acquisition, as well as temperature programming for the column oven. Fast cool-down fans automatically cool the column oven at the end of the analysis from 250^oC to 50^oC in less than five minutes.

Catalytic Combustion Detector for Hydrocarbon selectivity, 100% to 500ppm sensitivity

About as sensitive as a TCD, the Catalytic Combustion Detector has the hydrocarbon selectivity of an FID, plus the ability to operate on air alone. Because the CCD requires no compressed gases like hydrogen or helium, it can be used in Buc Gasless GCs where our internal "whisper quiet" air compressor supplies the ambient air carrier gas. The CCD detector can also be used as a hydrocarbon monitor in non-chromatographic applications where the CCD senses the total hydrocarbon content of a flowing air stream, or as a hydrogen/hydrocarbon leak detector.

The CCD sensor, shown above, is rugged and can be expected to last a long time. A second sensor is included in the detector housing at no extra cost, providing a built-in replacement should the first sensor become inoperable. Replacement sensor sets install in minutes without tools and are very economical, making this detector a good choice for academic settings where the sensors may be damaged by inexperienced operators.

Our CCD detector consists of a tiny coil of platinum wire embedded in a catalytic ceramic bead. A small electric current flows through the patinum coil, heating the ceramic bead to around 500^oC. The CCD is maintained in an oxidative environment by using air carrier gas. When a hydrogen or hydrocarbon molecule impacts the hot bead, it combusts on the surface and raises the temperature and resistance of the platinum wire. This resistance change causes the detector output signal to change, thus producing a peak. The brass detector housing is mounted on a stainless steel bulkhead fitting, which is mounted directly in the wall of the GC column oven.

This chromatogram shows a separation of 1000ppm methanol from acetone at 150^oC and air carrier from the Gas-less G built-in air compressor. The negative peak at the beginning of the run is water.

Documents & Software Downloads

310 Gas Chromatograph PDF

Buck Scientific Gas Chromatograph Users Manual

PeakSimple Software for free!