Sartorius LMA110-SET Mark 3 LTE Moisture Analyzer

Mark 3 LTE moisture analyzer, which includes:

• Control module LMA110SA-000U
• Heater module LMA110SQ-000U (1 mg, 40 g)
• optional upon request: Individual moisture analysis service (YMD01P)

Benefits:

• Economical and reliable alternative to greenhouse
• One-button measurements - Operation with a few minutes learning curve
• Robust and fast, ideal for routine operation
• Multiple module operation allows parallel measurements of up to 2 different samples to be performed on a single device

Specifications:

• Integrated calibration weight: No
• Data interface: Serial
• Dimensions (WxDxH): 41.3 x 49.5 x 23.5 cm
• Sample Ids: Yes
• Memory data storage: 999 individual results with statistics: average, SD, RSD, high and low
• Display: Quarter VGA with contrast adjustment (black on white or white on black), Sealed membrane keypad with audible tactile feedback
• Readability: 1 mg, 0.01%
• Analysis mode: Timer mode, when value falls below a defined weight loss per time unit (% / min), trend shutoff
• Presentation mode for results: Weight,% Moisture,% Solids,% Volatiles, PPM moisture, PPM drying mass
• Heating mode: Standard or concentration mode, programmable temperature steps, one or two
• Maximum number of programs: 60
• Password protection: Yes
• Maximum weighing capacity: 40 g
• Line tension: 90-250 VAC 50/60 Hz self-adjusting power supply
• Modular configuration control and heater modules: Optional, up to 2 heater
• Temperature Adjustment: Optional fixture for internal electronic two point
• Temperature Display: Display of both target and current temp at each stage of drying and standby
• Conserve Mode Clock: Programmable time by day of week to shut down and wake up analyzer
• Ideal Weight: Audio and visual signal when ideal weight is reached
• Target Limit Alert: Minimum and maximum programmable limits and screen alert when test
• Operator names: Twenty alphanumeric operator names
• Graph Mode: Graph of Temperature / Time and Percent / Time
• Internal Clock Date and Time: International, Military or AM / PM
• Audible Tone: Key stroke, ideal weight met and end of test, selectable On or Off
• System Status Indicator Lights: Two tri-color LEDs (balance & heater) on front of heater module
• Heating source: Thermogravimetric, loss on drying, Heat Source: Four parallel infrared quartz cylinders
• Temperature range: 30 degree C - 210 degree C in one-degree increments / RTD sensor, +/- 1 degree C, Standby temperature selectable from 30 degree C - 160 degree C
• Weighing system accuracy: +/- 1 mg
• Starting at an initial sample weight of approximately 1 g: ? 0.2%
• Starting at an initial sample weight of approximately 5 g: ? 0.05%
• Approximate weight: 10 kg

Application note
Data_Mark3_LTE_App_Snack_Food_W - 2051-e.pdf
Data_Mark3_LTE_App_Chemicals_Minerals_W - 2052-e.pdf

Data Sheet
Mark 3 LTE Moisture Analyzer - Modular Infrared Moisture Analyzer with Quartz Radiator